Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

Problem

The level (brightness) and/or color temperature of an Imatest Lightbox or Light panel does not respond to Lighting Control commands. The following lines might display repeatedly in the Imatest Log Window:

Unable to write command to light.
No message received from lightbox.

Solution

  1. Make sure the lightbox is plugged in and turned on.
  2. Make sure the lightbox drivers are installed. If the drivers are needed, install these and restart computer.

Filter by label

There are no items with the selected labels at this time.



  • No labels